CH577
Cortex-M0 Core Bluetooth Low Energy MCU – CH577, CH578
Warning: get_headers(): SSL operation failed with code 1. OpenSSL Error messages: error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed in /www/wwwroot/default/klayerslocal/wp-content/themes/klayers/single-product.php on line 60
Warning: get_headers(): Failed to enable crypto in /www/wwwroot/default/klayerslocal/wp-content/themes/klayers/single-product.php on line 60
Warning: get_headers(https://static.klayers.net/pdf/2308/CH578-Qinheng_KL-229-0004875.pdf): failed to open stream: operation failed in /www/wwwroot/default/klayerslocal/wp-content/themes/klayers/single-product.php on line 60
Warning: Division by zero in /www/wwwroot/default/klayerslocal/wp-content/themes/klayers/functions.php on line 634
SKU: KL-229-0004875
Category: Microcontroller Units (MCUs/MPUs/SOCs)
About this item
| Attribute | Value |
|---|---|
| Manufacturer | WCH(Jiangsu Qin Heng) |
| Package | QFN28 |
| Frequency | 40MHz |
| Flash | 128K |
| SRAM | 16K |
| GPIO | 20 |
| WDOG | YES |
| RTC | YES |
| SPI | 1 |
| UART | 2 |
| BLE | 4.2 |
| Timer | 3*26b |
| VDD | 2.5V; 3.3V; |
| PWM | 3 |
| DataFlash | 2K |
| Core | Cortex-M0 |
Overview
CH578 is a 32-bit MCU with integrated BLE wireless communication, based on ARM core. CH578 integrates abundant peripheral sources, such as BLE wireless communication module, Ethernet controller and transceiver, full-speed USB host and device controller and transceiver, segment-LCD driver module, ADC, touch-key detection module and RTC. CH577 is a simplified MCU of CH578, with 128KB flash memory and 16KB RAM, but without analog modules of Ethernet, USB, segment LCD, ADC and so on. Others of CH577 are the same as that of CH578, refer to CH578 datasheet and other technical resources directly.
System Block Diagram
Features
- 32-bit ARM Cortex-M0 core, up to 40MHz system clock frequency.
- Built-in 32KB SRAM, 160KB CodeFlash, 2KB DATA Flash, 4KB BootLoader. Support ICP, ISP and IAP. Support OTA wireless upgrade.
- Support BLE, compatible with Bluetooth Low Energy Specification Rev. 4.2.
- Integrated 2.4GHz RF transceiver and band and link control, single-end RF interface, no external capacitor required, simplified board design. Provide protocol stack and API.
- Support supply of 3.3V and 2.5V, the supply ranges from 2.1V to 3.6V. Built-in DC/DC converter. The current is 6mA at 0dBm transmission power
- Low-power modes: Idle, Halt, Sleep, Shutdown. Built-in battery low voltage monitor, and the lowest current is 0.2uA.
- 10M Ethernet interface with built-in PHY.
- Built-in USB controller and USB transceiver. Support USB2.0 full-speed and low-speed host or device. Support control/bulk/interrupt synchronous transfer. Support USB type-C master-slave/current detection.
- Built-in real-time clock (RTC). Support two modes, timing and trigger.
- Segment-LCD driver interface. Support 96-point (24×4) LCD panel.
- 6-channel 12-bit ADC. 6-channel touch-key.
- 3 x 26-bit timers. Support capture/sample. 11-channel PWM output.
- 2 independent UARTs, compatible with 16C550, the baud rate can be up to 5Mbps.
- One SPI with built-in FIFO. SPI0 supports Master mode and Slave mode. DMA capability.
- LED dot matrix display interface: 1/2/4-channel data line.
- Built-in temperature sensor.
- 40 GPIOs, 32 interrupt inputs.
- Built-in AES-128 encryption/decryption unit, unique ID.
- Packages: QFN48_5X5, QFN28_4X4
Send your message to supplier
Buy More, Save More!
Unit Price$2.0120
10219 in stock
How to buy?
- Please enter the quantity you need, then click GET QUOTATION NOW button to add the products to your cart, no payment required.
- After receiving your order, we will contact you and share you with discount according to the quantity.
- If you confirm the order, you can proceed the payment when order is updated with price adjustment.